Water Atm Vending Machines – Coin & Card Operated

Water Atm Vending Machines – Coin & Card Operated

Product Specification

 

Brand	AQUAFILTER
Coin Operated	YES
Water Storage Capacity	250 L
Vehicle Type	NO
Display Type	Digital
Machine Operating Type	AUTOMATIC
Capacity	250
Power	1KW
Designed For	BUSINESS
Minimum Order Quantity	1 Piece

 

 

TECHNICAL SPECIFICATIONS

 

1.RAW WATER PUMP

 

Purpose- To feed the Dual Media

Filter at pressure more than

2.0 bar, which is min. operating pressure for filter.

Specifications

1.  MOC : CI
2. Type : Horizontal Centrifugal Power Required: 0.5 HP
3.  Electrical : 230 V, Single phase , 50 hz
4.  Make : Cri 0.5 HP
5. Quantity : 1

2.DUAL MEDIA FILTER

Purpose- To remove the total suspended solids, dirt , iron andreduce silt density index which can foul the membranes

Specifications Vessel :

1. a) Make: Pentair, Sealfo or Equivalent
2. b) Material of Construction: FRP
3. c) Diameter: 8”
4. d) Height: 44”
5. e) Testing Pressure : 10 kg/cm2
6. f) Opening: Top
7. g) Quantity: 1 No. Valve:3/4”

 

3.MICRON FILTER

Purpose To remove the fine particles up to 05 microns and reduce silt density index levels to acceptable level.

Specifications Cartridge Filter & Housing Housing:

1. a) MOC of Housing: PP
2. b) Length : 20”
3. c) Diameter: 2.5”
4. d) Quantity : 1 No.Cartridge :
5. e) Make : Seaflo
6. f) Cartridge MOC : Polypropylene
7. g) Length: 20”
8. h) Diameter : 2.5”
9. i) Quantity: 1 no.
10. k) Micron rating: 05 micron

4. HIGH PRESSURE PUMP

Purpose- To feed the Reverse Osmosis Membrane at pressure more than the osmotic pressure taking into consideration flux rate, flow and recovery.

Specifications

1. a) MOC : Stainless Steel
2. b) Type : Vertical Multi stage
3. e) Power Required: 1.5 HP
4. f) Electrical: 230 V , Single phase, 50 hz
5. h) Make: CRI

5.RO MEMBRANE

Purpose- To remove the major part of TDS upto 98% by Reverse Osmosis Membranes arranged and designed to give adequate flow and recovery.

Specifications

1. Type: Spiral Wounded
2. The diameter of Membrane: 2.5 inch
3. Length of Membranes: 1 Mt.
4.  No. of Membranes : 1
5.  Salt Rejection per Membrane: 98-99%
6.  Make of Membranes: Vontron/ Thaiaqua/Dow 4040 or Equilent
7. System Recovery: 50 %

6.RO PRESSURE TUBE

Purpose To pack Reverse Osmosis Membranes and operate at high pressure up to 250 psi

Specifications

1. a) MOC: FRP
2. b) Diameter of Pressure Vessel : 4.5 inch
3. c) Length of Pressure Vessel : 1 m
4. d) No. Pressure Vessels: 1
5. e) No. of Membrane per Vessel: 1
6. f) Position: Horizontal, Series
7. g) Arrays: 1 No.9ELECTRIC PANALICONPurpose

A control panel is provided as a safety measure for the pumps & other electrical items.

Specifications-

1. a) Complete Starters, Overload relays, and single-phase preventor for Pump.
2. c) Push Buttons10

7.INSTRUMENTATION

 Purpose-

1. a) Flow Meter To measure the online flow of water
2. b) Low Pressure Switch : To protect RO pump from dry running
3. c) High Pressure Switch: To protect RO pump from back pressure
4. d) Pressure Gauges : For calculate ^P for each unit in RO system

Specifications

 

Rota Meter :Quantity : 2 Nos.( permeate & reject line)

Range : 250 ltr per hour